Software Testing Questions and Answers

Find the answers at the end of the questions.

1) The approach/document used to make sure all the requirements are covered when writing test cases
a) Test Matrix b) Checklist c) Test bed d) Traceability Matrix


2) Executing the same test case by giving the number of inputs on same build called as a) Regression Testing b) ReTesting c) Ad hoc Testing d) Sanity Testing


3) Control Charts is a statistical technique to assess, monitor, and maintain the stability of a process. a) True b) False


4) To check whether we are developing the right product according to the customer requirements are not. It is a static process a) Validation b) Verification c) Quality Assurance d) Quality Control


5) To check whether we have developed the product according to the customer requirements r not. It is a Dynamic process. a) Validation b) Verification c) Quality Assurance d) Quality Control


6) Staff development plan describes how the skills and experience of the project team members will be developed. a) True b) False


7) It is a set of levels that defines a testing maturity hierarchy a) TIM (Testing Improving Model) b) TMM (Testing Maturity Model) c) TQM(Total Quality Management)


8) A Non-Functional Software testing done to check if the user interface is easy to use and understand a) Usability Testing b) Security Testing c) Unit testing d) Block Box Testing


9) The review and approved document (i.e. Test plan, System Requirement Specification’s) is called as a) Delivery Document b) Baseline Document c) Checklist


10) What are the Testing Levels? a) Unit Testing b) Integration Testing c) System Testing and Acceptance Testing. d) All the above


11) Cost of quality = Prevention Cost + Appraisal cost + Failure cost a) True b) False


12) A useful tool to visualize, clarify, link, identify, and classify possible cause of a problem. This is also called as “fishbone diagram” what is this? a) Pareto Analysis b) Cause-and-Effect Diagram


13) It measures the quality of processes used to create a quality product.
It is a system of management activities,
It is a preventive process, It applies for entire life cycle & Deals with Process. a) Validation b) Verification c) Quality Assurance d) Quality Control


14) Variance from product specifications is called? a) Report b) Requirement c) Defect


15) Verification is
a) Process based b) Product based


16) White box testing is not called as___________
a) Glass box testing b) Closed box testing c) Open box testing d) Clear box testing


17) Name the events that will be analyzed, Count the named incidents, Rank the count by frequency using a bar chart & Validate reasonableness of the analysis is called as a) Pareto Analysis b) Cause and Effect Diagram c) SWOT Analysis d) Pie Charts


18) Retesting of a single program or component after a change has been made? a) Full Regression Testing b) Unit Regression c) Regional Regression d) Retesting


19) Requirement and Analysis, Design, Development or Coding, Testing and Maintenance is called as Software Development Life Cycle (SDLC ) a) True b) False


20) The testing which is done by going thro’ the code is known as,
a) Unit Testing b) Blackbox testing c) White box Testing d) Regression testing


21) Configuration Management Plan describes the Configuration Management procedures and structures to be used. a) True b) False


22)This type of testing method attempts to find incorrect or missing functions, errors in data structures or external database access, interface errors, Performance errors and initialization and Termination errors. It is called as a) White Box Testing b) Grey Box Testing c) Black Box Testing d) Open Box Testing


23) Phase Definition. It will come under a) CMM Level 1 b) CMM Level 2 c) None


24) Software testing which is done without planning and Documentation is known as
a) adHoc Testing b) Unit Testing c) Regression testing d) Functional testing.


25) Acceptance testing is known as
a) Beta Testing b) Greybox testing c) Test Automation d) White box testing


26) Retesting the entire application after a change has been made called as? a) Full Regression Testing b) Unit Regression c) Regional Regression d) Retesting


27) Boundary value analysis belongs to which testing method?
a) Black Box testing b) White Box testing


28) It measures the quality of a product
It is a specific part of the QA procedure, It is a corrective process,
It applies for particular product & Deals with the product. a) Validation b) Verification c) Quality Assurance d) Quality Control


29) What are the Types of Integration Testing? a) Big Bang Testing b) Bottom Up Testing c) Top Down Testing d) All the above


30) Product Risk affects The quality or performance of the software. a) True b) False


31) A metric used to measure the characteristic of documentation and code called as a) Process metric b) Product Metric c) Test metrics


32) Which is non-functional software testing?
a) Unit Testing b) Block box testing c) Performance Testing d) Regression


33) The process that deals with the technical and management issues of software development called as? a) Delivery Process b) Testing Process c) Software Process


34) Executing the same test case on a modified build called as a) Regression Testing b) Retesting c) Ad hoc Testing d) Sanity Testing


35) Which is Black-Box Testing method?
a) equivalence partitioning b) code coverage c) fault injection


36) Business Risk affects The Organization developing or Procuring the software. a) True b) False


37) Stratification is a Technique used to analyze/divide a universe of data into homogeneous groups (strata). a) True b) False


38) Automation Testing should be done before starting Manual testing.

Is the above statement correct?
a) Yes b) No


39) Earlier a defect is found the cheaper it is to fix it.

Is the above statement correct? a) Yes b) No


40) Informing to the developer which bug to be fix first is called as a) Severity b) Priority c) Fix ability d) Traceability


41) Software Testing is a process of evaluating a system by manual or automatic means and verify that it satisfies specified requirements or identity differences between expected and actual results. a) True b) False


42) Retesting modules connected to the program or component after a change has been made? a) Full Regression Testing b) Unit Regression c) Regional Regression d) Retesting.


43) An Important metric is the number of defects found in internal testing compared to the defects found in customer tests, Status of test activities against the plan, Test coverage achieved so far, comes under a) Process Metric b) Product Metric c) Test Metric


44) Alpha testing will be done at,
a) User’s site b) Developers’ site


45) SPICE Means a) Software Process Improvement and Capability Determination b) Software Process Improvement and Compatibility Determination. c) Software Process Invention and Compatibility Determination. d) Software Process Improvement and Control Determination


46) Requirements Specification, Planning, Test case Design, Execution,
Bug Reporting & Maintenance This Life Cycle comes Under a) SDLC b) STLC c) SQLC d) BLC


47) It provides a set of levels and an assessment model, and presents a set of recommended practices that allow organizations to improve their testing processes. a) TIM (Testing Improving Model) b) TMM (Testing Maturity Model) c) TQM(Total Quality Management)


48) Standards and procedures for managing changes in an evolving software product is called? a) Confirmation Management b) Confederation Mangement c) Configuration Management d) Compartability Management


49) Path Tested = Number of Path Tested / Total Number of Paths a) True b) False


50) This Testing Technique examines the basic program structure and it derives the test data from the program logic; Ensuring that all statements and conditions executed at least once. It is called as a) Block box Testing b) White box Testing c) Grey Box Testing d) Closed Box Testing


51) This type of test include, how well the user will be able to understand and interact with the system? a) Usability Testing b) User Acceptance Testing c) Alpha Testing d) Beta Testing.


52) Defects generally fall into the following categories? a) WRONG b) MISSING c) EXTRA d) All the above


53) What is correct Software Process Cycle? a) Plan(P)——>Check(C)——>Act(A)—–>Do(D) b) Plan(P)——>Do(D)——>Check(C)—–>Act(A) c) Plan(P)——>Do(D)——>Act(A)—–>Check(C)


54) Conducted to validate that the application, database, and network they may be running on can handle projected volumes of users and data effectively. The test is conducted jointly by developers, testers, DBA’s and network associates after the system Testing called as a) Functional Testing b) Stress/Load Testing c) Recovery Testing d) Integration Testing


55) Maintenance Plan predicts the maintenance requirements of the system, maintenance costs and effort required a) True b) False


56) Beta testing will be done by
a) Developer b) User c) Tester


57) Validation plan describes the approach, resources and schedule used for system validation a) True b) False


58) Integration, It will come under a) CMM Level 1 b) CMM Level 3 c) CMM Level 2 d) None


59) Types of quality tools are Problem Identification Tools and Problem Analysis Tools. a) True b) False


60) Which Software Development Life cycle model will require to start Testing Activities when starting development activities itself
a) Water falls model b) Spiral Model c) V-model d) Linear model


61) A metric used to measure the characteristic of the methods, Techniques and tools employed in developing, implementing and maintaining the software system called as a) Process metric b) Product Metric c) Test metrics


62) Check Sheet(Checklist) is considered a simple , but powerful statistical tool because it differentiates between two extremes. a) True b) False


63) Application should be stable. Clear Design and Flow of the application is needed for Automation testing. a) False b) True


64) Quality plan describes the quality procedures and standards that will be used in a project. a) False b) True


65) How severely the bug is effecting the application is called as a) Severity b) Priority c) Fix ability d) Traceability


66) Project Risk affects The Schedule or Resources. a) True b) False


67) The name of the testing which is done to make sure the existing features are not affected by new changes
a) Recursive testing b) Whitebox testing c) Unit testing d) Regression testing


68) Management and Measurement, It will come under a) CMM Level 1 b) CMM Level 3 c) CMM Level 4 d) CMM Level 2


69) AdHoc testing is a part of
a) Unit Testing b) Regression Tesing c) Exploratory Testing d) Performance Testing


70) Cost of Production = Right The First time cost(RTF) + Cost of Quality. a) True b) False


71) ————- means under what test environment(Hardware, software set up) the application will run smoothly a) Test Bed b) Checkpoint c) Code Walk through d) Checklist


72) TQM represents
a) Tool Quality Management b) Test Quality Manager c) Total Quality Management d) Total Quality Manager


73) Optimization, Defect Prevention, and Quality Control. Its come under the a) CMM Level 2 b) CMM Level 3 c) CMM Level 4 d) CMM Level5


74) Unit Testing will be done by
a) Testers b) End Users c) Customer d) Developers


75) Beta testing will be done at
a) User place b) Developers place


76) A Plan to overcome the risk called as a) Migration Plan b) Master plan c) Maintenance plan d) Mitigation Plan


77) Splitting project into tasks and estimate time and resources required to complete each task called as Project Scheduling a) True b) False


Answers


(1) d (2) b (3) a (4) b (5) a (6) a (7) b (8) a (9) b (10) d (11) a (12) b (13) c (14) c (15) a (16) b (17) a (18) b (19) a (20) c (21) a (22) c (23) b (24) a (25) a (26) a (27) a (28) d (29) d (30) a (31) b (32) c (33) c (34) a (35) a (36) a (37) a (38) b (39) a (40) b (41) a (42) c (43) c (44) b (45) a (46) b (47) a (48) c (49) a (50) b (51) a (52) d (53) b (54) b (55) a (56) b (57) a (58) b (59) a (60) c (61) a (62) a (63) b (64) b (65) a (66) a (67) d (68) c (69) c (70) a (71) a (72) c (73) d (74) d (75) a (76) d (77) a